====== How to Project Wirelessly ====== Teachers this year will use the Epson EasyMP Network Projection software in order to project wirelessly from their tablets. ===== Connecting ===== - Launch "EasyMP Network Projection" from your Start Screen. - If this is your first time launching EasyMP, you may see a dialog asking if you want to use Quick Connection Mode or Advanced Connection Mode. - Select //Advanced Connection Mode//. - Tick the box labelled, //Set the selected Connection Mode as the default mode for future connections.// - Click OK. - You may see a dialog asking if you want to disable the firewall. Click //Yes//. If you receive a UAC prompt, click Yes again. - When EasyMP launches it will automatically search for projectors. On our wireless network this will fail to find any results. Click //OK// to continue. - Look at your projector. You should have the projector set to the LAN source. - You will see the projector's name, IP address, and keyword. If you do not see this, you are on the wrong source. - Click //Manual Search// at the top of the EasyMP window. - Type the IP address shown on the projector into the dialog that appears. Click OK. - You should see the projector's status in the projector listing. - Click the checkbox next to the projector, then click //Connect// at the bottom right. - You will be prompted for the projector's keyword. Enter the keyword displayed on the projector and click OK. - A toolbar will appear in the bottom-right of your screen where you can control the projector options. - To disconnect from the projector, click "Disconnect" on the right side of the projection toolbar. ===== Saving Projectors in the Profile ===== EasyMP allows you to save the address of your projector(s) in your profile. These addresses will change from time to time, but it may we worth saving them in order to reduce effort getting connected. - Start while viewing your projector list. Check the box next to that projector on the left. - Click the //Save in the profile// button. - Give your profile a name. You can call it "My Projectors", or whatever you like. - The next time you launch EasyMP, instead of clicking //Manual Search//, click the downward triangle next to //Profile// at the top, then select the named profile you created. - Your projectors saved in the profile will appear in the listing. If a projector does not show as being offline or not connected, it's IP address may have changed. You may have to reconnect to that projector using //Manual Search//. ===== Video Guide: Epson EasyMP ===== {{:video_guides:easymp_network_projection.webm?1024|Video Guide to using the EasyMP Network Projection software}} ====== Troubleshooting ====== ===== Wrong Connection Mode ===== If you select Quick Connection Mode the first time you launch EasyMP and set that as default, you won't be able to connect to our projectors. To connect you will need to reset the application settings and then choose Advanced Connection Mode when prompted. - Open EasyMP. - Click **Set options**. - Click **Restore Defaults**. - Click **OK**. - Exit EasyMP. - Open EasyMP. - Select **Advanced Connection Mode** and tick the box, //Set the selected Connection Mode as the default mode//. - Click OK.